ezCAN for BMW R1200 Oil/Air Cooled

$229.95

ezCAN plug-and-play accessory manager for BMW R1200 oil/air cooled bikes. Trailer lighting applications in videos below.

SKU: ez.RA Categories: ,

Description

Motorcycles are complicated. Which means you may hesitate to touch the wiring system to add support for trailer lights. What if you blow something up? Melt something critical? Or worse yet, void your warranty? That could cost a lot to fix. Or, you could avoid all that with the ezCAN.

ezCAN is an accessory manager that plugs into BMW’s CAN bus system, reading the computer messages being passed through the wiring harness. It is a completely invisible system. Your bike has no idea it is connected. If something happens in the wiring on the trailer, software-controlled fuses in the ezCAN will shut down the circuit and protect the bike.

You configure the ezCAN to do what you want using a piece of simple software. You can set up any one of the four outputs on the ezCAN to perform trailer lighting functions—running/tag lights, left turn, right turn and brake. If your trailer’s brake lights are combined with the turn signals, you can program the ezCAN to handle that, too.

Yes, the ezCAN is more expensive that some other wiring solutions, including ones that I sell. But it has a number of advantages that make it worth the extra cost.

It is small. Compared to some of the other wiring kits, the ezCAN is much smaller. It is one component, housed in a weatherproof shell. It fits in much tighter spaces.

It is simple. Unlike other kits, the ezCAN requires no assembly. It connects to your bike’s computer and to the battery. You just add a plug to the end and configure the module to work the way you want.

It is flexible. You can configure the ezCAN to power the lights on any trailer and you can change the configuration if you need to tow a different trailer.

And even if it is more expensive than the other kits, it’s still less than a repair bill.

Check out the videos and you’ll see just how easy this system is to set up and use. Hex Systems, the manufacturer, has an extensive website with a vast amount of support information and videos for the ezCAN. Pick your bike and you’ll find installation videos and much more.

This model works on the following BMW lines:

  • R1200GS – K25
  • R1200GS Adv – K25
  • R1200RT – K26
  • R1200R – K27
  • R1200ST – K28
  • R1200S – K29

How to use the ezCAN for Trailer Lighting Applications

ezCAN as Trailer Wiring Intro https://youtu.be/x0m_IHewOWc

Trailer 4 Wire System https://youtu.be/rG7Ao4I3YyI

Trailer 5 Wire System https://youtu.be/rG7Ao4I3YyI

More Features https://youtu.be/rG7Ao4I3YyI

Installation video from Hex Systems  https://youtu.be/X22HdaWOe-o

 

 

Additional information

Weight 1 lbs